国产精品视频观看,又大又粗有色,琪琪吊操人妻日韩精品,欧美 国产 日韩成人

服務熱線

15021010459
產品中心
當前位置:主頁 > 產品中心 > 其他 > DEX40 >10% LMD in 5% Dextrose Injection

10% LMD in 5% Dextrose Injection

簡要描述:LMD (dextran 40) is a sterile, nonpyrogenic preparation of low molecular weight dextran (average mol.
wt. 40,000) in 5% Dextrose Injection or 0.9% Sodium Chloride Injection.

  • 產品型號:0409-7418-03
  • 廠商性質:代理商
  • 更新時間:2025-02-13
  • 訪  問  量:2499
詳細介紹

10% LMD
in 5% Dextrose Injection
DEXTRAN 40 IN DEXTROSE INJECTION, USP

EACH 100 mL CONTAINS 10g DEXTRAN 40, 5g DEXTROSE,
HYDROUS. 255 mOsmol/LITER (CALC.). pH 4.4 (3.0 TO 7.0)
STERILE, NONPYROGENIC.

ADDITIVE MEDICATIONS SHOULD NOT BE DELIVERED VIA
PLASMA VOLUME EXPANDERS.

SINGLE-DOSE CONTAINER. CONTAINS NO BACTERIOSTAT.
DISCARD UNUSED PORTION. FOR INTRAVENOUS USE.
USUAL DOSAGE: SEE INSERT. STORE AT 20 TO 25°C (68 TO
77°F). [SEE USP CONTROLLED ROOM TEMPERATURE.]
PROTECT FROM FREEZING. DO NOT USE IF
CRYSTALLIZATION HAS OCCURRED. USE ONLY IF SOLUTION
IS CLEAR AND CONTAINER IS UNDAMAGED. MUST NOT BE
USED IN SERIES CONNECTIONS.

DESCRIPTION 
LMD (dextran 40) is a sterile, nonpyrogenic preparation of low molecular weight dextran (average mol. wt. 40,000) in 5% Dextrose Injection or 0.9% Sodium Chloride Injection. It is administered by intravenous infusion. 
Also described as low viscous or low viscosity dextran, dextran 40 is prepared by acid hydrolysis and The structural formula for dextran (repeating unit) is: 
 Dextrose, USP is chemically designated D-glucose monohydrate (C6 H12 O6 ? H2O), a hexose sugar freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. 
Water for Injection, USP is chemically designated H2O. 
The flexible plastic container is fabricated from a specially formulatedpolyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of the chemical components of the plastic in very small amounts before the expiration period is attained. However, safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. 


differential fractionation of a crude macromolecular polysaccharide produced from the fermentation of sucrose by the bacterium, Leuconostoc mesenteroides (strain B-512). The crude material is composed of linked glucose units. In the fraction represented by dextran 40, 80% of the molecules have a molecular weight ranging from 10,000 to 90,000 (average approximay 40,000) when measured by a light 
scattering method. More than 90% of the linkages are of the 1,6 alpha glucosidic, straight chain type. Each 100 mL of 10% LMD (dextran 40) in 5% Dextrose Injection contains 10 g dextran 40 and 5 g dextrose hydrous in water for injection. Total osmolar concentration is 255 mOsmol/liter (calc.); pH is 4.4 
(3.0 to 7.0). Each 100 mL of 10% LMD (dextran 40) in 0.9% Sodium Chloride Injection contains 10 g dextran 40 and 0.9 g sodium chloride in water for injection. Total osmolar concentration is 310 mOsmol/liter (calc.); pH is 4.9 (3.5 to 7.0) (may contain sodium hydroxide and/or hydrochloric acid for pH adjustment). Electrolyte concentration per liter: Na+ 154 mEq; Clˉ 154 mEq (not including ions for pH adjustment). 
The solutions contain no bacteriostat, antimicrobial agent or added buffers (except for pH adjustment) and are intended only for single-dose injection. When smaller doses are required the unused portion should be discarded. 
10% LMD (dextran 40) is an artificial colloid pharmacologically classified as a plasma volume expander; 5% Dextrose Injection is a fluid and nutrient replenisher; 0.9% Sodium Chloride Injection is a fluid and electrolyte replenisher. 
Dextran 40 is a linear glucose polymer (polysaccharide) chemically designated (C6 H10 O5)n.

AVAILABILITY

Limited Inventory: 0409-7418-03Additional Information:  See below for more information regarding specific products. View additional information and potential alternatives.

ClassPlasma Volume Expander

Generic NameDextran 40 in Dextrose Injection, USP

NDC NumberStrengthTotal VolumeProduct ImageContainer TypeCap ColorNon-DEHPLatex InformationPreservative-FreeOrder SizeProduct Information












0409-7418-0310%500 mL10% LMD in 5% Dextrose Injection (Dextran 40 in Dextrose Injection, USP)Flexible ContainerN/A
YesYes1 Case (12) 













現貨供應,歡迎訂購!:    


 


產品咨詢

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7
推薦產品

2025 版權所有 © 重慶市華雅干細胞技術有限公司  備案號:渝ICP備14000349號-4 sitemap.xml 管理登陸 技術支持:化工儀器網

地址:重慶市江北區金渝大道153號8棟20-14 傳真:023-63419626 郵件:sales@ys-bio.com

重慶市華雅干細胞技術有限公司主要經營干細胞研究 干細胞治療產品 生物試劑 實驗耗材 藥物研發等產品。

關注我們

服務熱線

400-021-2200

掃一掃,關注我們

人妻 无码一区二区| 天天操天天射天天爽| 人人操人人88| 日本中文乱码字幕在线网站| 国产精品毛许无遮挡| 无码av无码天堂资源网z| 日产精品a 人妻无码| 加勒比无码一区人妻| 男生女生黄色av| 超碰人人妻人人 ,草| 国产成人咱精品视频免费网站| 1022国产精品| 精品一区二区免费视频| 东京热无码中文字幕视频| 国产无遮挡裸体免费视频| 国产主播在线专区| 91人人妻人人澡人人爽国| 91香蕉国产线在线观看免费| 狠狠色丁香婷婷综合尤物| 一本二本道日本免费久久| 亚洲国产一区二区三区精品| 久久久午夜精品福利内容| 日本久久超碰| 亚洲图片,欧美色图| 激情久久小说| 精品一区二区无码免费| 久九九黑人| 四虎永久免费人妻精品| 天天摸天天摸色综合舒服网久久久久久 | 新久久久久久一级毛片免费看| 亚洲色欲一区二区三区四区五区| 久久久久久国产三级| 久久久久 二区| 日本人妻偷人视频| 99re这里是国产精品首页| 皋兰县| 夜色阁亚洲一区二区三区| 日韩欧美在线一区| 亚洲色五月天| 久久99天堂av亚洲av| 国产99精品久久久|